ScopeTester 5 Oscilloscope Tester

ScopeTester 5 is 5-channel oscilloscope tester for PCs. Unlike traditional oscilloscopes it is capable of continuous acquisition of signals without dead times. This feature gives exceptional diagnostic value. Available voltage ranges matches typical signals found in modern cars. The user may connect to vehicle sensors, actuators and other diagnostic equipment, such as current clamps, inductive and capacitive probes and other diagnostic probes.

Availability:
Available
Categories: ,

€569,00 VAT 0%
€699,87 VAT 23%

ScopeTester 5 is 5-channel oscilloscope tester for PCs. Unlike traditional oscilloscopes it is capable of continuous acquisition of signals without dead times. This feature gives exceptional diagnostic value. Available voltage ranges matches typical signals found in modern cars. The user may connect to vehicle sensors, actuators and other diagnostic equipment, such as current clamps, inductive and capacitive probes and other diagnostic probes.

ScopeTester 5 pomiar

ScopeTester 5 pomiar

ScopeTester 5 can record from 1 second up to 10 minutes of continuous waveform. Thus, it is possible to capture even single anomaly occurrence during that period. Real-time preview mode helps shorten measurements if longer acquisition is not required offering functionality similar to classic oscilloscope.

The device offers an unique feature of signal interpretation for signal types commonly used in vehicles, such as PWM or crankshaft position sensor (CPS) signal. As a result, instead of working with hard to read voltage signals (on the left), the user can work with the waveforms showing PWM duty cycle or momentary engine speed (on the right).

ScopeTester 5 pomiar

Waveforms can be saved and then viewed and analyzed at any time. Saved files can also be used as a reference and compared with new measurements on a common graph.

ScopeTester 5 pomiar

Additional 5-channel multimeter mode with minimum/maximum function allows the user to measure voltages, currents (using current clamp or shunt), frequency and PWM duty cycle. Simple to use and giving unique features ScopeTester 5 offers also exceptional value for money.

 

Specifications:

Supply voltage 5V DC (powered by USB, does not need external supply)

Operating conditions 0-50°C

Voltage ranges (channels: 1,2) -1,25..1,25V; -2,5..2,5V, -5..5V, -10..10V, 0..5V, 0..20V

Voltage ranges (channels: 3, 4, 5) 0..5V, 0..20V

Voltage measurement accuracy 1%

 

Kit contents:

ScopeTester 5 device

1m measurement cable with banana plugs and alligator clips – 2 pcs

1m measurement cable with alligator clips – 3 pcs

USB cable

Differential attenuator 1:10 – 2 pcs

User manual

CD-ROM with software and driver

Catalog number: 0002
Part number: 0002
Warranty: 24 months
Shipping time: In stock!

Darmowa Dostawa

(DHL Polska)

Files for logged in buyers

To be able to download files you need to log in.

Publicly available files Unfortunately, there are no downloads available.

ScopeTester 5 – FAQ

 

I lost my software CD. How can I get the program?

The software for the device can be downloaded after prior registration and logging in to our website: https://dte.com.pl/en/my-data/

 

How to install Scope Tester 5 on Windows 10/11?

We install the software as usual using the installer. When installing the driver, follow the necessary steps described in detail in the Manual. The manual with the current software and driver can be be obtained after prior registration and logging in to our website: https://dte.com.pl/en/my-data/

 

Can I use my own current clamps?

The device works with any current clamps, also with a non-standard current/voltage converter. It is needed to set required clamp gain by selecting from the list or by entering a specific value in mV/A units.

 

Can I use a 1:10 probe?

Yes, but it should be a differential probe. You can use the available 1:10 adapters included in the set or use other specialized ones, designed for differential inputs.

 

The waveform ‘jumps’ on the screen, is this normal?

ScopeTester 5, unlike classic oscilloscopes, records waveforms in a continuous manner, performing the measurement without the so-called dead times. The available preview mode does not allow for triggering synchronization, therefore the waveforms are not stable in this mode.

 

There is a lot of noise in the waveform

To ensure complete safety of measurements, the device uses differential channels, thanks to which the BNC connector grounds are connected by high resistance only. However, it causes sensitivity to too high values of common voltages supplied to the input. Some laptop power adapters are the most common cause (not all models are affected). In case of problems, the solution is to disconnect the power supply for the duration of the measurement.