The GP-1 tester allows the generation of a PWM signal designed to test a wide range of components. The devices provide the opportunity:
– control of all kinds of solenoid control valves, commonly used in both gasoline and diesel engines (e.g., EGR valve, turbocharging pressure limiting valve, etc.) allowing to check their correct operation,
– Speed control of DC motors (DC motors),
– control of the fuel dose adjuster or ignition advance valve in fuel pumps used in diesel engines,
– and to control other devices using PWM signal, controlled by ground or supply voltage,
The PWM signal measurement module provides information on the frequency and filling of the measured signal. It is commonly used to analyze the correctness of control of components using PWM signals.
Device parameters
| Supply voltage | constant, range 12…15V |
| Current consumption | 70 mA (current consumed by the tester, no load) |
| PWM signal generator | |
| Frequency range | 20Hz – 1000Hz |
| Frequency control accuracy | 1Hz |
| Amplitude of the output signal | From 0V to the supply voltage |
| Type of control | Ground controlled output and supply voltage controlled output |
| Coefficient adjustment range | 0%…100% |
| Coefficient adjustment accuracy | 0.1% |
| PWM signal measurement | |
| Measured frequency range | 20Hz – 1000Hz |
| Input signal amplitude | from 0V to supply voltage |
| Switching voltage threshold | 2.5V |
| Security | |
| Voltage | Exceeding the supply voltage (above 18V) |
| Current | Exceeding the allowable current of 6.3A (fuse) and short circuit protection |
Kit contents:
GP-1 device,
Measuring cable (2pin plug),
Steering cable (universal pins),
Control cable (crocodiles),
6A spare fuse
