Scope DT oscilloscope is a device aimed at the automotive industry.
It has two isolated channels and two differential channels, which minimizes the possibility of damage to the device or components under test when improperly connected.
Built-in library of sample runs along with educational materials on the components under test.
Help on how to operate and take measurements is included directly in the device.
The device has a Diagnoscope Mode – 27 components with information on construction, operation along with information on how to diagnose them with an oscilloscope.
Help is available in the device interface – you can’t lose it.
The device will only come with a “Quick Start” – the most important information about battery charging, buttons, etc.
Browser access – a simple web interface allows you to download waveform files, screenshots and view the device screen.
This will allow the device to work with any computer, tablet or phone equipped with a browser and operating on the same WiFi network.
Therefore, it works independently of the operating system and no application is required.
To update, all you need is an Internet connection via WiFi – the device downloads data from the server on its own, no additional applications are needed.
7” screen with 800×480 resolution.
The device is operated by buttons next to the screen.
Powered by an internal Li-Ion battery providing several hours of continuous operation (about 6 – 8).
Charging via the included mains charger (12V voltage) in approx.
2.5 hours.
Two classic oscilloscope probes and two probes terminated with banana plugs/crocodles are included.
Maximum sampling of 25Msps, bandwidth up to 5MHz for differential channels and over 1MHz for isolated channels.
Time base adjustable from 1us/dz to 500s/dz.
Gain from 20mV/dz to 50V/dz.
Scope DT – sample measurement
2 channels fully galvanically isolated from the rest of the device (up to 1kV DC) and 2 differential channels (ScopeTester has differential channels alone).
Isolated channels accept without additional probes voltages in the range of +/- 100V (+/- 200V temporarily).
The differential channels accept voltages of +/- 50V.
(In comparison, ScopeTester allowed to measure voltages up to 20V max without additives).
You can use current clamps as with any other oscilloscope.
Available probe calibration signal output (1kHz).
Specification:
Display: 7” 800×480
Maximum Sampling: 25 Mbsps
ADCs: 12bit + 8bit Channels 1 and 2
Input voltages -100 . 100V (at peak -200 .. 200V)
Input parameters: 1MΩ, 18pF
Input type: DC, AC
Galvanic isolation: up to 1kV DC
Bandwidth: 1.5MHz Channels 3 and 4
Input voltages -50 … 50V
Input parameters: 1MΩ, 18pF (differential input)
Input type: DC
Bandwidth: 5MHz
Probe calibration output: 1kHz / 3.3V Vpp
Internal memory: 8GB
Power supply: 7.2V Li-ion battery
Charging: external 12V 2A power supply
Charging time: up to 2.5h
Operating time: up to 8h
Operating conditions: Temperature 0 – 50ºC, Humidity < 95%
Weight: 960g
Accessories included:
1) Power supply 12V
2) Oscilloscope probe with 1:10 divider – 4 pcs.
3) Measuring cable 1m with banana plugs and crocodiles – 2 pcs.
4) Measuring grips small- 2 pcs.
5) Measuring grips large- 2 pcs.
6) Probe calibration adapter – 1 pcs.
7) Screwdriver for probe calibration – 2 pcs.
8) Measuring tips ( needles) black- 8 pcs.
9) Measuring tips ( needles) mix colors- 8 pcs.
