Tester 2V cells BLT150T
The BLT150T load tester is a professional resistor designed by DeltaTech Electronics, based on the experience of the best specialists in the battery industry. This Polish battery tester is used to test the efficiency of 2V cells. The product can be successfully used in automotive workshops, automotive stores, specialized traction battery service points, as well as by battery manufacturers and importers.
The BLT150T Resistor allows quick testing of battery efficiency and identification of defects and wear – becoming an indispensable tool in points handling complaints.
BLT150T battery tester – basic technical parameters
- Voltage rating: 2V.
- Power supply: 3V – 2 AA/LR6 batteries.
- Voltmeter range: ±18 V, with an accuracy of ±0.5% +2 digits.
- Current load: 150A max.
- Length of measuring cable including clamp: 70cm ±1%
- Dimensions of the device: (D/W/Sz) 280 x 195 x 80 mm, weight 1.4 kg.
Traction battery tester – how does it work?
Preparing the resistor for the traction battery test
- Check the condition of the battery tester and its cables. Make sure they are in good condition and have no mechanical damage.
- Ensure a safe place to conduct the test. Avoid explosive gases and flammable materials!
- You don’t need to check the battery status in the tester – the BLT150T Resistor will do it for you.
- Your safety comes first! Familiarize yourself with the warning signs on the body of the resistor and comply with them.
Connecting the load tester to the battery
- Connect the connector to any 2V cell terminal ( post, screw, etc.) and apply the resistor tip to the other pole. The test can be performed without polarity. The test probe can be connected to either the positive or negative post of the battery.
- Make sure the connections are stable.
- The device will automatically excite itself as long as the voltage of the battery under test is higher than 1V, and then perform a performance test .
- If the resting voltage of the battery is less than 1V, you can manually turn on the tester by clicking the left button on the voltmeter panel.
- Make sure the battery under test is fully charged before proceeding with the load test.
Selection of parameters and load range of the resistor.
- Select the appropriate current load range on the tester:
- 2V: typically 50A, 100A, 150A ranges
- The selection of the range is made using the knobs on the resistor. The device has 3 circuits – each 50A for a 2V cell. If you try to test a 6V battery, the resistance of 1 spring is 150A.
The first circuit of the resistor is closed permanently. By tightening the knob, you close the circuit by activating the next winding. In this way you increase the resistance by another 50A.
Performing a load test – basic.
- Press the device against the terminal.
- Observe the voltage measurement on the display. The tester will subject the battery to the declared load.
- Note the results:
- For an efficient 2V cell – the voltage shown on the display should drop and stabilize above 1.75V
- If the battery is faulty the voltage will drop towards 0V
- The load test should not last longer than 20s.
Perform a load test – semi-automatic.
- Press the left button of the voltmeter.
The display below the battery voltage will show an elapsed time bar measuring 12 sec, which will begin to fill up when the tester is pressed. - Press the device against the terminal.
- Observe the voltage measurement on the display. The tester will subject the battery to the declared load and inform you with a double beep that the test is complete.
- Finish pressing the resistor – you can break the connection to the terminal of the battery under test.
- When the right button is pressed, the battery tester’s display will show a graphical voltage waveform, the maximum and minimum measured voltage and the measured voltage difference.
- The load test lasts for 12s – after this time the tester will announce the end of the data collection stage. After exceeding 15s, an audible alarm is activated.
Graphical presentation of battery measurement results
Turn off the tester and disconnect the wires.
- Before disconnecting the BLT150T battery tester, remember that the resistance windings are hot. If you touch them, you risk getting burned. Take care of your safety!
- Release the connection by detaching the resistor grommet from the terminal, and then disconnect the terminal from the battery.
- Put the device away in a safe place. Avoid contact of the heated surface of the resistor with flammable gases and materials!
- The device will automatically turn off 4 minutes after the last activity (pressing any of the buttons or taking a measurement). It is possible to manually turn off the tester by pressing (>1s) the right button for a longer time.
Analysis of the results and completion of the work.
- Compare the results obtained with the battery manufacturer’s recommended values.
- If necessary, submit the battery for further diagnosis or replacement.
- Store the tester in a dry and safe place, away from sources of heat and moisture.
BLT150T load battery tester – what sets it apart?
- Versatility of operation: BLT150T can test batteries and 2V cells with 50A /100A/ 150A load .
- Powered by two AA (LR6) batteries: Using popular AA batteries provides easy access to power and saves time and operating costs.
- Automatic activation when input voltage is detected: the tester starts automatically when connected to the battery under test, saving the user time.
- Automatic Power Off (APO): This feature saves batteries by automatically turning off the device after four minutes of inactivity.
- Measuring System Selftest: The tester automatically checks its circuits after startup, which guarantees correct operation and reliable measurements.
- Audible signaling: the BLT600S informs the user of the start and end of the test, and sounds an audible alarm if the recommended time is exceeded.
- Bi-directional load testing: It is possible to test regardless of how the battery is connected to the battery terminals, which increases convenience.
Distinguishing technical parameters of the resistor:
- Aluminum body with thick walls: The high temperature capacity of the body allows for longer operation without the risk of overheating the tester.
- Extended and low profile: Allows work in hard-to-reach places, increasing the stability of the device.
- 25mm² connection wire: Ensures safe conduction of high current, which improves cable life and device performance.
- Modular thrust springs: With the ability to tighten the springs, the user adjusts the load to test different battery capacities.
- Unique serial number: Each tester has an individual number, which helps identify the device and increases security.
Distinctive features of the load tester software :
- Advanced Voltmeter Module: Graphically shows a graph of the voltage waveform, and records key parameters such as no-load voltage, under-load voltage and voltage drop for easy interpretation of results.
- Precision and averaged modes: the tester offers the option of operating in precision mode with a refresh rate of 8 times per second or in averaged mode (average of 4 measurements), which stabilizes the displayed results.
- Summary of parameters before shutdown: Before shutting down, the device presents a table with six key parameters, giving a complete overview of the tester’s operation.
- Operating mode and battery status icons: Visual indicators provide information about the current operating mode and battery level for greater ease of use.
- Graphic and audio indication of test time: A progress bar and audible signals indicate the 6-second test time, then alerts when the recommended time is exceeded. This is to maintain repeatability of measurement procedures.
Distinctive mechanical functions of the load tester :
The BLT150T battery load tester is not just a hand-held resistor – it’s a comprehensive solution that makes workshop work easier.
The SecureSpring mechanism is an advanced spring system used in the BLT150T, designed for optimal and safe operation during battery testing.
The key element of this mechanism is a specially selected spring of precisely optimal hardness that:
- Minimizes pressure on battery terminals: The spring provides optimal resistance. Less pressure is needed to close the circuit, which affects the condition of the battery terminals during measurements.
- Ensures smooth operation of the actuator: SecureSpring enables smooth and stable movements during operation of the device, which reduces blade slippage during operation.
- It increases the comfort of work: With the right spring hardness, the operation of the device is more ergonomic, requiring less physical effort on the part of the user.
- Increases device reliability: With SecureSpring, the tester operates more efficiently, longer and with less risk of damage, resulting in a longer life for the entire system.
This device increases the confidence of diagnosis and provides precise measurements. With its advanced features, and its robust construction and attention to detail, the BLT150T is indispensable in the daily work of professionals.
SecureSpring spring mechanism
Check out the BLT150T tester in practice – the reliability you need!
The BLT150T battery tester is a Polish advanced diagnostic tool that increases the efficiency of proper diagnosis of 2V cells and batteries. Thanks to its simple operation and ergonomic design, the testing process is fast and repeatable.
Combined with the DBT-12+ tester, the BLT150T provides a comprehensive evaluation of the condition of batteries, helping to detect faults and assess their performance.
Providing a maximum load of up to 150A, the BLT150T is compact and extremely rugged, making it ideal for heavy-duty use in:
- auto repair shops,
- automotive stores,
- traction battery service points.
Its automatic features, such as startup and a shutdown system when inactivity is detected, allow users to focus on professional diagnostics without unnecessary surprises.
Using the BLT150T load tester, you not only get an advanced diagnostic tool, but also full technical and service support. Our devices are created based on the highest quality standards, which guarantees reliability and durability. Take advantage of an additional 12 months of warranty when you register your purchase.
Trust the experts at DeltaTech Electronics
DeltaTech Electronics team is supported by the best Polish experts in the battery industry. We are ready to provide assistance at every stage of the use of our products. We offer professional technical support, consulting and after-warranty service to ensure that your battery tester will serve you for many years.
Akumulator – nie wystarczy go wymienić, trzeba go zaprogramować – część 1.
