DM-1 Car diagnoscope

The DM-1 microprocessor car diagnoscope supports electrical and electronic equipment regardless of a vehicle make or model. This small and handy device provides a wide range of possible applications, similar to those offered by the most expensive stationary diagnoscopes.

Availability:
Available
Categories: , , ,

€419,00 VAT 0%
€515,37 VAT 23%

The DM-1 microprocessor car diagnoscope supports electrical and electronic equipment regardless of a vehicle make or model. This small and handy device provides a wide range of possible applications, similar to those offered by the most expensive stationary diagnoscopes.

These are the examples of the diagnoscope test functions:

ABS Sensors
Alternator – ripple voltage
Battery voltage
Camshaft position sensor
Crankshaft position sensor
Knock sensor
Flow meter
Vacuum sensor
Pressure sensor
Throttle position sensor
Coolant temperature sensor
Oil temperature sensor
Air temperature sensor
Vehicle speed sensor
Ignition distributor sensor
Tank system
Exhaust Gas Recirculation System
Idle speed adjustment
Ignition system
Injectors
CAN bus/BUS protocol
. . . and many others

Technical specifications for the DM-1 diagnoscope:

Analog-to-digital converter: 32 MHz
Input frequency: 1 MHz (-3dB dla 1V/dz)
Input impedance: 1 MW/20pF
Input voltage range: -100V – 100V to the top (without probe x10)
Input signal type: AC, DC, GND
Resolution: 8 bit
Linearity: +/- 1bit
Display: Backlit monochrome LCD, 64 x 128 pixels
DC voltage measuring range: -80V do 80V (bez sondy x10)
Peak-to peak voltage measurement range: 0 do 160V (no probe x10)
Time base: 1,25us; 2,5us; 5us; 10us; 20us; 50us; 100us;200us; 500us; 1ms; 2ms; 5ms; 10ms; 20ms;50ms; 100ms; 200ms; 500ms; 1s; 2s; 5s; 10s;20s; 30s; 1min; 2min; 5min; 10min; 20min;30min; 1h na działkę
Gain (without probe x10): 5mV; 10mV; 20mV; 50mV; 0,1V; 0,2V; 0,4V1V; 2V; 4V; 8V; 20V per div
Probe calibration output signal x10: 1kHz/ ok. 5Vpp, strengthening 50% (optional)
Number of memory modules: 7
Supply voltage: 11VDC do 15VDC 500mA
Batteries: Typ AA NiMH minimum 1800 mAh – 5 szt.
Maximum battery charging current: 200 mA
Maximum battery life: 10 h
Operating temperature: 0 – 50 deg C
Dimensions: 80x200x120mm
Weight: 450g (without batteries)

Diagnoscope DM-1 can also serve as an attachment to the PC turning it into an oscilloscope. The programme used for this function is delivered free of charge as a promotional product.

Warranty: 24 months
Shipping time: In stock!

Shipping cost depends on the country to which the products are to be sent and it is determined after choosing the products.

Files for logged in buyers

To be able to download files you need to log in.

Publicly available files Unfortunately, there are no downloads available.

DM-1 – FAQ

 

I lost my software CD. How can I get the software?

The software for the device can be downloaded after prior registration and logging in to our website: https://dte.com.pl/en/my-data/

 

My computer does not have a serial port, how do I connect the device to my computer?

In the case of computers with USB ports, you can use the USB -> Serial Port (COM) adapter. It is good to choose a good quality product, e.g. based on the FT232RL chip. If you have an older software, please download the current version.

 

The original power supply has been damaged. Which power supply should I use?

In the event of a defect during the warranty period, please contact our service. The device requires a stabilized 12V power supply with a 5.5 / 2.5mm connector (positive tip, negative sleeve).

 

I have an older DM-1 device. Is it possible to replace the battery or repair the device?

We offer both the possibility of replacing the battery and the possibility of repairing or calibrating older devices. We invite you to contact our service.