GP-1 PWM signal tester
The GP-1 tester allows the generation of a PWM signal designed to test a wide range of components. The devices provide the opportunity:
– control of all kinds of solenoid control valves, commonly used in both gasoline and diesel engines (e.g., EGR valve, turbocharging pressure limiting valve, etc.) allowing to check their correct operation,
– Speed control of DC motors (DC motors),
– control of the fuel dose adjuster or ignition advance valve in fuel pumps used in diesel engines,
– and to control other devices using PWM signal, controlled by ground or supply voltage,
The PWM signal measurement module provides information on the frequency and filling of the measured signal. It is commonly used to analyze the correctness of control of components using PWM signals.
Dostępność:
In stock
EAN:
5906236591020Numer części:
GP-1
€405,59
brutto
Description
The GP-1 tester allows the generation of a PWM signal designed to test a wide range of components. The devices provide the opportunity:
– control of all kinds of solenoid control valves, commonly used in both gasoline and diesel engines (e.g., EGR valve, turbocharging pressure limiting valve, etc.) allowing to check their correct operation,
– Speed control of DC motors (DC motors),
– control of the fuel dose adjuster or ignition advance valve in fuel pumps used in diesel engines,
– and to control other devices using PWM signal, controlled by ground or supply voltage,
The PWM signal measurement module provides information on the frequency and filling of the measured signal. It is commonly used to analyze the correctness of control of components using PWM signals.
Device parameters
| Supply voltage | constant, range 12…15V |
| Current consumption | 70 mA (current consumed by the tester, no load) |
| PWM signal generator | |
| Frequency range | 20Hz – 1000Hz |
| Frequency control accuracy | 1Hz |
| Amplitude of the output signal | From 0V to the supply voltage |
| Type of control | Ground controlled output and supply voltage controlled output |
| Coefficient adjustment range | 0%…100% |
| Coefficient adjustment accuracy | 0.1% |
| PWM signal measurement | |
| Measured frequency range | 20Hz – 1000Hz |
| Input signal amplitude | from 0V to supply voltage |
| Switching voltage threshold | 2.5V |
| Security | |
| Voltage | Exceeding the supply voltage (above 18V) |
| Current | Exceeding the allowable current of 6.3A (fuse) and short circuit protection |
Kit contents:
GP-1 device,
Measuring cable (2pin plug),
Steering cable (universal pins),
Control cable (crocodiles),
6A spare fuse
Additional information
| Weight | 4 kg |
|---|
Inpost
DHL EU
Fedex World
What is the GP-1 tester used for?
The GP-1 tester is a PWM signal generator with which you can check all kinds of solenoid valves used in passenger cars.
Attention! The tester is not suitable for checking solenoid valves with a protective diode or other elements protecting against overvoltage.
What kind of power does the GP-1 tester require?
The GP-1 tester is adapted to be powered from a 12V battery – the power terminals are terminated with alligator clips enabling the connection of appropriate cables to the battery clamps. It tolerates supply voltages in the range of 11 … 15V.
Is it possible to update on-line?
It is not possible to update the GP-1 on-line.
What signal frequency range does the GP-1 generate?
The generated frequency range is: 20Hz … 1000Hz. The device allows you to set the frequency with an resolution of 1Hz.
What range of the signal duty cycle can be set?
The duty cycle can be adjusted in the range of 0% … 100% with an resolution of 0.1%.
What wires are used to connect the solenoid valves for the test and are they included with the generator?
The test valves are connected by means of cables terminated with universal plugs. These cables are included in the kit.
